Custom Haus 'A303' Styling Package
What, as far as we're concerned, is the Holy-Grail, long distance, get-there-in-a-hurry setup; The S+S 18" Steel Wheel and Bilstein B14 Suspension.
We're fortunate enough to have had a plethora of suspension setups on numerous Volkswagen T5+T6 vans in the past. Budget coilovers, cheap air-ride set ups, expensive air-ride setups and of course, the Bilstein B14 coilovers. We believe this setup to be superior compared to standard shocks, air ride or budget Coilovers.
Being OE manufacturers for the majority of German car brands more expensive, luxury models, including BMW 3 series and up, the majority of Mercedes and also Porsche it's fair to say Bilstein's product and brand history needs no introduction.
The B14 Coilover is an adjustable setup which doesn't deteriorate with the height you choose to adjust them to. The setup can be wound low for a more purposeful stance, whilst at the same time, maintaining everyday usability as shown on our demo van in the photos below.
The B14 fits all variants of the T5 and T6, T26 through to T32. Installation takes place at the S+S Custom Haus and includes the balance and fit of our own 18inch Steel Wheel and Falken Tyre package. For the surgery to take place we will need your van in the studio for 2 days, use our online booking calendar to see our next available slot, or email thecustomhaus@stitchesandsteel.com.
+ Please note + We recommend you take your van for a full alignment after having your suspension upgraded. While the CH crew are incredibly handy on the spanners, this is not a service we can offer at this time.
KIT CONTAINS
-
Bilstein B14 Komfort Coilover Suspension
- The S+S Steel Wheel and 'On Road' Tyre Package
- S+S Door Decal kit
- Stealth S+S raised awning rail
THE DETAILS
What Bilstein have to say; the B14 benefits at a glance:
- Lowering range between 40-70mm front and rear
- Road-tested by BILSTEIN under motor sports conditions and fine-tuned
- Spring plates and lock nuts made from a special aluminium alloy
- Surface coating using Triple-C-Technology® for long-lasting corrosion resistance
- Round threads for ease of adjustment
- Quality sport springs made from highly durable material
- BILSTEIN gas pressure technology
- BILSTEIN mono-tube/Upside-Down technology, made in Germany
- German TÜV certificate.
INSTALL TIMES
We need your van for 2 days to install our A303 Styling Package. Check the booking calendar for our next available slot.
If you can't find a suitable date or have any questions, speak to the friendly crew over on thecustomhaus@stitchesandsteel.com
Lead times and install times vary for all of our 'Part Builds'.
Please check our booking calendar for the next available slot.
Don't wait, our lead times are subject to change. During busy periods, in the run up to Christmas, whilst we have offers running, or after a product launch, our build slots can fill up fast.
You're welcome to email if you have specific requirements or would like a more detailed outline of our lead times and the product.
Contact us at thecustomhaus@stitchesandsteel.com
The Custom Haus: See it as our own Garage, It's our own outlet for our creativity. It's where the design, prototype and manufacture of all S+S products starts, it's also where they finish.
The Custom Haus is a space for the supply and fitment of STITCHES + STEEL products onto, into or around a Contemporary Moving Space.
Located on the East Coast, in Essex- Unit 2, The Old Joinery, Maldon Road, Birch, Essex, CO2 0LT
STITCHES + STEEL Conversions, once fitted, cannot be guaranteed by STITCHES + STEEL. While these products are engineered to withstand typical road conditions, any misuse or unconventional application, or incidents may result in failure for which STITCHES + STEEL cannot be held liable.
Steel, known for its strength and repairability, remains subject to corrosion. Despite our efforts to utilize high-quality steel and protective coatings, we cannot ensure the longevity of the finish. Consequently, these products fall under the same classification as non-refundable and non-returnable once installed.
We understand that these products are substantial purchases and they might require more explanation than what's provided in the description. You're very welcome to mail our friendly and experienced crew over at thecustomhaus@stitchesandsteel.com who will happily help or walk through any questions or queries you may have.
We're on hand to answer your queries Monday- Friday, 8.30am- 4.30pm.
Custom Haus Conversions and Part Builds
FAQ's
Depending on how many goodies you're having fitted by us, installation ranges from a couple of hours through to a week.
Check the booking calendar and description for accurate install times.